Enagic® Together We Are 3A campaign explained

Together We Are 3A campaign details

A new Enagic® distributor is 1A from the moment they join, before making any sales. Normally they then work up through the 1A lanes (2 separate direct sales) and the 2A lanes (sales 3 through 10) before reaching 3A. This campaign lets you skip those two positions entirely.

Campaign period: opened 20 September 2026, running until further notice.

The end date has moved three times. Enagic® published none when the campaign opened, then confirmed a close of 30 September, then extended it to 10 October, then on 10 October extended it again until further notice, with no new date attached. This article said each of those things in turn and has been corrected each time.

The extension is worth noting for more than the extra ten days. Enagic® did the same thing with its Anniversary Special Kangen Campaign, which was extended through July 2026. On current form, a published end date on an Enagic® campaign is better read as the next review point than as a hard stop. Plan to the date you actually have, because an extension is never guaranteed, but do not treat a missed deadline as final either until the campaign is confirmed closed.

The date that counts is when a sale is registered, not when the customer agreed or paid. That distinction matters far more in the closing days than it did at the start: paperwork submitted on the 29th that comes back for a correction is dated when it lands, not when it was first sent. Enagic®'s materials also state that rules are subject to change, so confirm current terms on DSP rather than assuming the deadline holds exactly.

The campaign flyer says: purchase a K8, SD501 DX, or ANESPA® DX and jump straight to 3A. For a brand new distributor, that is literally true. Enagic®'s own campaign FAQ confirms it: buying one of the three eligible products as your first purchase gives you a boost start to 3A, with no sale required beneath you.

What the flyer leaves out is that this is only one of two routes. If you are already a distributor, or you joined on something that is not campaign-eligible, you do not get the boost. You rank up to 3A only when an eligible sale registers beneath you, inside the campaign window. Most of the confusion around this campaign comes from those two routes being described as one.

Enagic® Australia wrote to a distributor early in the campaign that a new distributor must first purchase one of the eligible products, and that it is their next sale, whatever the product, that is then eligible to be placed at 3A. Read alongside Case 4, that describes what the 3A rank lets you do — place sales into 3A lines — rather than a condition you have to meet before holding the rank. The rank comes first; the lines are what you fill afterwards.

This is the plain-English breakdown of what the campaign actually requires.

Which products are campaign-eligible

The list started at three and grew. The three KangenWagyu® Elite products were added on 10 October 2026, alongside the extension, so anyone working from the original campaign flyer is working from a shorter list than the one in force. Nothing outside this table counts.

Only one of them is needed, not a combination. Enagic® has confirmed this twice: a new distributor who buys a single K8 starts at 3A, and an existing distributor needs one qualifying sale, not several. Non-eligible products can still play a role, depending on whether they are your own purchase or the sale beneath you.

The one rule underneath all of it

Every case in the official materials reduces to a single rule:

A campaign-eligible product has to be registered during the campaign period, either as your own first purchase or as a direct sale you personally sponsor.

Which of the two it has to be depends entirely on your status when the campaign sale happens, and the difference is the single most misread part of this campaign.

It has to be a direct sale. A qualifying product bought by someone two or more levels below you is an indirect sale, also called a group sale. Under this campaign it ranks up its own direct sponsor, not you. Enagic®'s October clarification is explicit on this: it is the direct sponsor who becomes 3A.

That does not make a deep sale worthless to you. Indirect sales count toward normal rank advancement exactly as they always have, because the ladder above 1A runs on total group sales rather than directs: 3A at 11 to 20, 4A at 21 to 50, and so on up to 6A at 101. A sale two levels down can still move your rank the ordinary way. What it cannot do is trigger the campaign's jump.

If you join with an eligible machine, you are 3A from the start, and every sale you go on to place drops into a 3A line.

If you join with something else, or you are already a distributor, you have to earn it: a direct sale beneath you has to be one of the campaign-eligible products, registered inside the window.

One restriction on the participating distributor: it must be a distributor account, and it cannot be a Tokurei account.

The four official case studies in plain English

Case 1: A whole line ranking up at once

This is the case that gives the campaign its name.

• A1 is an existing distributor who joined on 1 August with any product
• B1 registers on 20 September with a K8, placed under A1
• C1 registers on 29 September with any product, placed under B1

A1 and B1 reach 3A by the two different routes. A1 is an existing distributor, so A1 ranks up because B1's K8 is a campaign-eligible sale registered beneath them. B1 is a new distributor who registered on an eligible product, so B1 holds 3A from the moment of joining, and C1 simply lands in one of B1's 3A lines.

Both lines are placed as 3A lines. The campaign cascades down a line rather than stopping at one person.

Note that A1 joined on 1 August, seven weeks before the campaign opened, and still qualifies. The campaign period applies to the campaign sale, not to when the participating distributor joined.

Case 2: Joining on a non-eligible product

• A1 is a new distributor who registers on 20 September with Ukon DD
• B1 registers on 21 September with a K8, placed under A1

Ukon DD is not campaign-eligible, so A1 does not get the new-distributor treatment. A1 falls back to the existing-distributor condition instead: the sale beneath them has to be eligible. B1's K8 satisfies that, so A1 is still eligible for the 3A rank-up.

Joining on a non-eligible product does not lock you out. It just moves the requirement onto the sale beneath you.

Case 3: Self-purchase, where new and existing distributors split

This is the case worth reading twice, because the rule reverses depending on status.

New distributor: Self-purchase counts.

• A1 registers on 20 September with an Anespa® DX
• A2 on 22 September is A1's own second purchase (Ukon DD)
• B1 on 25 September is a sale to someone else

Because A1 joined on a campaign-eligible product, both A2 and B1 are placed as 3A lines. The self-purchase is treated the same as any other sale.

Existing distributor: Self-purchase does not count.

• C1 is an existing distributor who registered on 1 August with an SD501 DX
• C2 on 22 September is C1's own purchase of an Anespa® DX
• D1 on 25 September is a K8 sold to someone else

C1 met the condition to rank up to 3A, but C2 was not treated as a 3A line because it was a self-purchase. It was placed at 1A. Only D1 counts as the campaign sale.

Enagic® has since put this more bluntly for existing distributors: a self-purchased sale from your second account onward does not rank up your existing distributor ID to 3A, and does not rank up the self-purchase account either.

Case 4: Multiple campaign product purchases

This is the case that settles what 3A actually means under the campaign, because it is the only one that shows an account's own rank separately from the line it sits in.

• A1 is an existing distributor who joined on 1 August with any product
• B1 registers on 20 September with a K8, placed under A1
• B2 on 20 September is B1's own self-purchase of an Anespa® DX
• C1 on 20 September is an Anespa® DX sold to someone else, placed under B1

A1 ranks up to 3A because B1's K8 is a campaign-eligible sale beneath them. B1 is 3A as well, but by the other route: B1 registered on an eligible product. Enagic®'s wording here is worth reading closely, because it settles the argument — B1 “has the eligibility to place a 3A line since the rank is 3A”. The rank is what confers the ability to place, not the other way around.

Then the part that gives the case its name. B1 buys a second campaign-eligible product, the Anespa® DX at B2. It is an eligible product, it is inside the window, and it still does not make B2 a 3A: B1 already holds a distributor ID by then, so the existing-distributor self-purchase rule applies. B2 is placed in a 3A line, but its own rank is 1A. C1, the same product sold to somebody else on the same day, does become 3A.

That is what Enagic® means by the boost applying to your first purchase only. Buying more eligible machines does not buy more 3A positions.

Line and rank are not the same thing. B2 is the proof: it sits in a 3A line while holding rank 1A. The line is where a sale is placed in the structure above it. The rank is what that account itself holds. Nearly every argument about this campaign comes from the two being used interchangeably.

What does not count

Read this list before you plan a sales sequence around the campaign.

• Self-purchases by existing distributors do not count as campaign sales. They are placed normally.
• Tokurei sales do not count as campaign sales, and a Tokurei account cannot be the participating distributor.
• Sales registered outside the campaign window do not count. The date that matters is the registration date, not the date the customer decided or paid.

Two things that do count, and are easy to assume otherwise:

• User accounts count as campaign sales.
• E-Payment registrations count as campaign sales.

What the campaign does not change

This is a placement campaign, not a compensation change. Enagic®'s materials are explicit on all four points:

• Sales unit counts are unchanged
• Sales amounts are unchanged
• GFS counts are unchanged
• Commission amounts on the campaign sale are unchanged

The rules for 4A rank-up and above are also unchanged. Accumulating the required sales points for 4A and beyond works exactly as it did before.

What changes is position, which changes how many of the eight commission points a direct sale pays to you rather than passing up the line. That is the campaign's appeal, and it is real. It is also worth putting a number on.

What the 3A jump is actually worth

The 8-point commission pays the seller points equal to their own rank, and the remaining points flow up the line. So the rank you hold on the day a sale registers is what decides how much that sale pays you.

Without the campaign, your first ten direct sales are the cheap ones:

• Sales 1 and 2 fill your 1A lanes and pay 1 point each
• Sales 3 to 10 fill your 2A lanes and pay 2 points each
• Sale 11 is the first to pay 3 points, because it is the first one that arrives after you are 3A

Under the campaign you hold 3A before the first of them. All ten pay 3 points.

Twelve extra points across the first ten sales. On K8s, at Enagic®'s published point value of US$270, that is US$8,100 against US$4,860 — roughly US$3,240 more for exactly the same ten sales.

Three qualifications worth stating plainly:

• The gain is finite and front-loaded. From sale 11 the two paths pay identically. The campaign accelerates the start; it does not raise the ceiling.
• US$3,240 is the K8 figure. Point values differ by product, so a mix of machines, Anespa and Ukon lands somewhere below it.
• The points come out of the upline's share. A 1A seller keeps 1 point and passes 7 up; a 3A keeps 3 and passes 5. The campaign moves money down the line. That is also why it ranks the sponsor up at the same time, so an upline sponsoring into the campaign is compensated by their own jump rather than left short.

For a distributor whose business never passes ten direct sales, those twelve points are the entire value of the campaign, and they receive all of it. For someone who intends to build, the honest framing is that it brings forward roughly one K8's worth of commission and gets them to the 3A position sooner.

You choose the lane, and the choice has a price

Enagic®'s October clarifications added a rule the earlier materials never stated, and it is the most consequential thing in them. The sponsor decides which line the new distributor goes into, that decision determines whether the sponsor ranks up at all, and it has to be made explicitly on the registration.

• You can designate the new distributor into a 1A, 2A, or 3A line, provided the normal rank conditions for that line are met.
• Selecting 3A as the line rank at registration is mandatory. Enagic® put this in writing on 10 October: a rank-up to 3A during this campaign requires that 3A is explicitly designated on the registration. It is not a default and it is not inferred.
• Designate a 1A or 2A line and you do not rank up to 3A. The campaign rank-up is yours only when the sale goes into the 3A line.
• The new distributor starts at 3A either way. Their own rank does not depend on which of your lines they sit in.

That combination is a trap worth naming. Because the new distributor starts at 3A regardless, a registration that was never designated 3A still looks correct from every angle a sponsor would check: the person is 3A, the sale processed, nothing errored. The only thing missing is the sponsor's own rank-up, and nothing on the form says so. Check the genealogy view after the registration processes rather than assuming it went where you meant.

Beyond that, the choice itself is a real decision rather than an obvious one. The person you sponsor loses nothing if you place them in a 1A lane: they still start at 3A, exactly as the campaign advertises. The only thing on the table is your own rank-up.

So the trade is between your position now and your structure later. The full 6A Title Incentive needs seven direct lines and this campaign does not change that number. A campaign sale placed into a 1A lane fills one of those seven and costs you the 3A jump on that sale. A campaign sale placed into the 3A lane takes the jump and leaves the 1A lane empty. With one campaign sale and empty 1A lanes, that is a genuine choice. With several, the question becomes which one you spend on the rank and which you spend on the structure.

This is the same lane-versus-rank distinction Case 4 draws, running the other way. There, B2 sat in a 3A line while holding rank 1A. Here, a new distributor holds rank 3A while sitting in your 1A line. Enagic® tracks the two independently, and once you can see that, most of the campaign's apparent contradictions stop being contradictions.

The 1A exemption, and what it does and does not cover

Enagic® Australia confirmed in writing early in the campaign that once a distributor qualifies for 3A under this promotion, they are exempt from the requirement to complete two direct 1A sales as they continue to rank up. What that confirmation did not settle was whether the exemption reached the 6A Title Incentive as well, or stopped at rank advancement. Those are two different things, and for the first weeks of the campaign nobody could say which one it was.

Enagic® has now answered it directly in the campaign FAQ published to the distributor portal. The exemption is the broader of the two readings:

• Rank advancement: a campaign qualifier can continue ranking up without the two direct 1A lines.
• Title Incentive: the two direct 1A lines are not required to receive the full Title Incentive bonus amount either.
• Still required: a total of seven direct lines to receive the full bonus.

So the campaign changes where two of your direct lines are allowed to sit. It does not change how many you need. A distributor who takes the 3A jump still has to build seven direct lines to collect the full 6A Title Incentive, and the rest of the 6A conditions are untouched: 101 accumulated sales units and US$300,000 in sales volume.

The part that matters if you have a team. The number to watch in a downline is seven directs, not the 1A lanes. If your own bonus at 6A2 depends on someone beneath you reaching 6A and qualifying for the full Title Incentive, and that person arrives at 6A on group volume without seven direct lines of their own, the shortfall reaches you as well.

This is a materially better answer for campaign participants than the one available at launch. The 3A jump is closer to free than it first looked. The cost that remains is not two skipped lanes; it is the same seven directs that every 6A has always needed, and the campaign neither adds to that number nor removes it.

What this means for your paperwork

Designating 3A on the form is mandatory, not advisable. Enagic® does not infer campaign placement from the date, and confirmed in writing on 10 October that selecting 3A as the line rank at registration is required to qualify for the rank-up. If the sale is meant to sit in the 3A line, the form has to say so. An operator who processed one early in the campaign put it plainly: do not assume Enagic® will place things where you want them.

Registration date is the deadline, not order date. A campaign sale counts when it is registered during the campaign period. Paperwork that is not signed for days, or gets returned and resubmitted because of missing information, is dated on the day it lands, not the day the customer said yes.

On multi-product orders, know which product is the campaign sale. If an order contains both an eligible machine and a non-eligible product, be clear about which one is being treated as the campaign sale and how each is placed. The sponsor on the first product is the upline; subsequent products in the same order are sponsored by the applicant, who becomes a distributor on their first purchase. Campaign eligibility rides on the specific registration, not on the order as a whole.

Confirm placement after the fact. Campaigns are administered by branch offices and placement corrections after submission are slow if they are approved at all. Check the genealogy view in DSP once the registration processes, and raise anything that looks wrong immediately rather than at the end of the month.

How to verify your status

Enagic® has not published a campaign-specific tracking screen, and they likely won't. Here's how you can verify your status yourself:

1. Log in to DSP and open the Distributor Genealogy Solution to confirm how the new registration was placed and what rank it is showing
2. Check your Sales Report for the registration date on the campaign sale, since that date is what determines eligibility
3. Confirm anything ambiguous with your branch office in writing before you build a rank plan on it

Genealogy data can take up to 24 hours to reflect a new registration.

Enagic® has also run Zoom training sessions on the campaign. Anything binding should come from those, the campaign FAQ on the distributor portal, or your branch office in writing. This article has been corrected more than once as Enagic® published further detail, so check the date at the top of it against what your branch is telling you.

Summary

• Campaign opened 20 September 2026 and has been extended twice, most recently on 10 October until further notice. No published end date, and Enagic® says it may end without prior notice
• Eligible products: LeveLuk K8, LeveLuk SD501 DX, Anespa® DX, and from 10 October the three KangenWagyu® Elite products
• Selecting 3A as the line rank at registration is mandatory. It is not a default, and a registration without it leaves the sponsor with no rank-up while still looking correct
• New distributor joining on an eligible product: you are 3A on joining, with no sale required beneath you
• Existing distributor, or joined on a non-eligible product: you reach 3A when an eligible sale registers beneath you
• A sale's line and an account's rank are different things. A self-purchase can sit in a 3A line and still be rank 1A
• The sponsor chooses the leg. Designate a 1A or 2A line and you do not rank up to 3A, though the new distributor still starts at 3A either way
• The campaign rank-up needs a direct sale. An indirect sale two or more levels down ranks up its own sponsor, not you, though it still counts toward normal group-sales rank advancement
• Your first ten sales pay 3 commission points each instead of 1 or 2 — twelve extra points, about US$3,240 on K8s
• Self-purchase counts for new distributors, not for existing distributors
• Participating distributor cannot be a Tokurei account; Tokurei sales are not campaign sales
• User accounts and E-Payments do count as campaign sales
• Sales units, sales amounts, GFS counts, and commission amounts are unchanged
• Campaign qualifiers are exempt from the two direct 1A sales both for ranking up and for the full 6A Title Incentive, but seven direct lines are still required for the full bonus
• Write the 3A lane on the order form. Placement is not inferred

Frequently Asked Questions

Does buying a K8 automatically make me 3A?

If you are joining Enagic® as a new distributor, yes. Enagic®'s campaign FAQ confirms that buying a K8, SD501 DX, Anespa® DX or a KangenWagyu® Elite product as your first purchase gives you a boost start to 3A, with no sale required beneath you. If you are already a distributor, or you joined on a product that is not campaign-eligible, no: you reach 3A only when an eligible sale is registered beneath you during the campaign period.

Does being 3A mean I am earning 3A commission straight away?

Only on sales you actually place. The rank sets what each sale pays you, three of the eight commission points instead of one, but an empty 3A lane pays nothing at all. It is the same position any new distributor is in at 1A with empty 1A lanes. The campaign changes which lane your future sales land in, not whether you have to make them.

I am 3A from the campaign but have not sold anything yet. If my first sale is two years away, does it still go into a 3A line?

On current information, yes. Enagic® has confirmed that you are not required to place a 3A direct sale during the campaign period, and that the 3A title stays valid after the campaign ends. The rank is what gives you the eligibility to place 3A lines, so a sale registered later still lands in one. The only deadline is on your own qualifying purchase, which has to fall inside the campaign window. Enagic® has not addressed a long gap in writing, so confirm it with your branch office before planning around one.

Which products qualify for the Enagic 3A campaign?

Six. The LeveLuk K8, the LeveLuk SD501 DX, and the Anespa® DX from the start, plus three KangenWagyu® Elite products added on 10 October 2026: KangenWagyu® Elite, KangenWagyu® Elite Combination, and KangenWagyu® Jerky 4 Set. Only one qualifying product is required, not a combination. Anyone working from the original campaign flyer is working from the shorter list.

When does the TOGETHER, WE ARE 3A campaign end?

There is no published end date. Enagic® extended the campaign until further notice on 10 October 2026. The date has moved three times: none at launch, then a confirmed close of 30 September, then 10 October, then the open-ended extension. Enagic® states that campaign rules are subject to change and that the campaign may end without prior notice, so confirm current terms on DSP rather than assuming it is still running.

If I sponsor someone during the campaign, do we both become 3A?

Yes. Enagic® describes the campaign as ranking up together: when a new distributor is introduced during the campaign period, both the direct sponsor and the purchaser become 3A.

Do I keep the 3A title after the campaign ends?

Yes. Enagic® has confirmed the 3A title remains valid after the campaign has ended, and you are not required to place a 3A direct sale during the campaign period in order to keep it.

Do I have to go back and fill my 1A lanes later?

No. Enagic®'s campaign FAQ confirms that a distributor who qualifies for 3A under this campaign can continue ranking up without the two direct 1A lines, and that those two 1A lines are not required to receive the full 6A Title Incentive either. The other 6A conditions are unchanged: 101 accumulated sales units and US$300,000 in sales volume.

Does skipping 1A affect the 6A Title Incentive?

Not through the 1A lines. Enagic®'s campaign FAQ states that the two direct 1A lines are not required to receive the full Title Incentive bonus amount. What is required is a total of seven direct lines. Campaign qualifiers need the same seven directs as everyone else, so the campaign changes where two of those directs may sit, not how many you need.

Do I have to tick 3A on the registration, or is it automatic?

No. Enagic® confirmed in writing on 10 October 2026 that selecting 3A as the line rank at registration is mandatory to qualify for the campaign rank-up. It is not a default and it is not inferred from the product or the date. The trap is that a registration without it still looks correct: the new distributor starts at 3A regardless, the sale processes, and nothing errors. The only thing missing is your own rank-up. Check the genealogy view in DSP once the registration processes.

Can I place a campaign sale in my 1A lane instead of my 3A lane?

Yes, and the new distributor still starts at 3A either way. But you do not rank up to 3A yourself if you designate a 1A or 2A line rank. Enagic® clarified in October 2026 that the sponsor chooses the line rank, provided the normal conditions for that leg are met, and that the sponsor's own campaign rank-up applies only when the sale is placed in the 3A lane. The trade is your rank now against a filled 1A lane toward the seven direct lines the full 6A Title Incentive requires.

If someone in my downline takes the 3A jump, does it affect my bonus?

It can, though not for the reason assumed when the campaign launched. Enagic® has since confirmed the two direct 1A lines are not required for the full Title Incentive, so skipping them is not the risk. The seven direct lines still are. Where your own bonus at 6A2 and above depends on a downline distributor reaching 6A and qualifying, someone who arrives at 6A without seven directs of their own does not receive the full bonus, and that shortfall reaches you too.

Does a K8 bought by someone two levels below me rank me up to 3A?

Not under this campaign. That is an indirect sale, also called a group sale, and the campaign rank-up goes to its direct sponsor, the person who personally made the sale. Enagic®'s October 2026 clarification states that the direct sponsor becomes 3A. The sale is not lost to you: indirect sales still count toward normal rank advancement, which runs on total group sales, so it moves you along the ordinary ladder. It just does not trigger the campaign's jump to 3A.

Does my own purchase have to be inside the campaign window, or only the sale beneath me?

Only the sale beneath you. In Enagic®'s own first case, the participating distributor registered on 1 August, seven weeks before the campaign opened, and still qualified. The campaign period applies to the campaign sale.

I'm 1A. Do I go straight to 3A, or do I have to reach 2A first?

Straight to 3A. The campaign materials state that a distributor at 1A or 2A can participate, and the outcome in both cases is the 3A position. A distributor has already reported processing a K8 as a first sale into the 3A lane for a 1A distributor without issue.

Does a self-purchase count as a campaign sale?

It depends on your status. For a new distributor, yes: a self-purchase is placed as a 3A line like any other sale. For an existing distributor, no. A self-purchased sale from your second account onward does not rank up your existing ID to 3A, and does not rank up the self-purchase account either.

I joined with a Ukon DD. Can I still qualify?

Yes. If you registered on a non-eligible product, you are treated under the existing-distributor condition: your campaign sale has to be one of the campaign-eligible products. Meet that and you are eligible for the 3A rank-up.

Can a Tokurei account participate?

No. The participating distributor must be a distributor account and cannot be Tokurei, and Tokurei sales do not count as campaign sales.

Do E-Payment registrations and user accounts count?

Yes. Both count as campaign sales, which is the opposite of how Tokurei and existing-distributor self-purchases are treated.

My customer is paying this week but the paperwork won't be registered for another week. Am I still in?

Only if the registration lands inside the campaign period, which currently has no published end date. Eligibility is tied to when the sale is registered, not to when the customer committed or paid, and anything returned for a correction is dated the day the corrected version lands rather than the day it was first sent. The campaign has been extended twice, but Enagic® says it may end without prior notice, so paperwork delay is a real risk rather than a theoretical one.

Is the campaign running in my country?

It appears to be global. Enagic® branch offices have published it openly, including Enagic® Thailand on 22 September 2026, and the campaign materials are corporate rather than regional. Campaigns are administered locally, so confirm the terms with your own branch before planning around them.

Related guides

• Enagic® Compensation Plan Explained — how positions and the 8-point structure work
• Enagic® 6A Explained — requirements, Title Incentive, and what changes
• Enagic® Anniversary Special Kangen Campaign — the June–July 2026 sales unit multiplier campaign
• Enagic® Glossary — definitions for Tokurei, GFS, DSP, DGS, and E-Payment